De hecho, tengo un sistema de automatización del hogar, me gustaría integrar un sistema de control de voz y para eso necesito poder llamar a comandos de shell como curl.
He visto muchos ajustes de Siri, pero ninguno de ellos permite asignar un comando de voz como: encender la luz a un comando de shell específico
Ok, lo hice funcionar con el increíble tweak Assistant+. Solo necesita configurar el comando de voz que no quiere decir, y luego puede escribir el comando de shell para ejecutar.
Cuesta 1.99$ en cydia
Aquí hay una secuencia de comandos de muestra para usar con el reconocimiento de voz. Puedes modificarlo a tu gusto.
with timeout of 2629743 seconds
set exitApp to "no"
repeat while exitApp is "no"
tell application "SpeechRecognitionServer" -- <callout id="code.osx-voice-automation.scpt.speechrecognizer"/>
activate
try
set voiceResponse to listen for {"light on", "light off", ¬
"unlock door", "play music", "pause music", ¬
"unpause music", "stop music", "next track", ¬
"raise volume", "lower volume", ¬
"previous track", "check email", "time", "make a call", ¬
"hang up", "quit app"} giving up after 2629743
on error -- time out
return
end try
end tell
if voiceResponse is "light on" then --
-- open URL to turn on Light Switch
open location "http://192.168.1.100:3344/command/on"
say "The light is now on."
else if voiceResponse is "light off" then
-- open URL to turn off Light Switch
open location "http://192.168.1.100:3344/command/off"
say "The light is now off."
else if voiceResponse is "unlock door" then
-- open URL to unlock Android Door Lock
open location "http://192.168.1.230:8000"
say "Unlocking the door."
else if voiceResponse is "play music" then --
tell application "iTunes"
set musicList to {"Cancel"} as list
set myList to (get artist of every track ¬
of playlist 1) as list
repeat with myItem in myList
if musicList does not contain myItem then
set musicList to musicList & myItem
end if
end repeat
end tell
say "Which artist would you like to listen to?"
tell application "SpeechRecognitionServer"
set theArtistListing to ¬
(listen for musicList with prompt musicList)
end tell
if theArtistListing is not "Cancel" then
say "Which of " & theArtistListing & ¬
"'s albums would you like to listen to?"
tell application "iTunes"
tell source "Library"
tell library playlist 1
set uniqueAlbumList to {}
set albumList to album of tracks ¬
where artist is equal to theArtistListing
repeat until albumList = {}
if uniqueAlbumList does not contain ¬
(first item of albumList) then
copy (first item of albumList) to end of ¬
uniqueAlbumList
end if
set albumList to rest of albumList
end repeat
set theUniqueAlbumList to {"Cancel"} & uniqueAlbumList
tell application "SpeechRecognitionServer"
set theAlbum to (listen for the theUniqueAlbumList ¬
with prompt theUniqueAlbumList)
end tell
end tell
if theAlbum is not "Cancel" then
if not ((name of playlists) contains "Current Album") then
set theAlbumPlaylist to ¬
make new playlist with properties {name:"Current Album"}
else
set theAlbumPlaylist to playlist "Current Album"
delete every track of theAlbumPlaylist
end if
tell library playlist 1 to duplicate ¬
(every track whose album is theAlbum) to theAlbumPlaylist
play theAlbumPlaylist
else
say "Canceling music selection"
end if
end tell
end tell
else
say "Canceling music selection"
end if
else if voiceResponse is "pause music" or ¬
voiceResponse is "unpause music" then
tell application "iTunes"
playpause
end tell
else if voiceResponse is "stop music" then
tell application "iTunes"
stop
end tell
else if voiceResponse is "next track" then
tell application "iTunes"
next track
end tell
else if voiceResponse is "previous track" then
tell application "iTunes"
previous track
end tell
-- Raise and lower volume routines courtesy of HexMonkey's post:
-- http://forums.macrumors.com/showthread.php?t=144749
else if voiceResponse is "raise volume" then --
set currentVolume to output volume of (get volume settings)
set scaledVolume to round (currentVolume / (100 / 16))
set scaledVolume to scaledVolume + 1
if (scaledVolume > 16) then
set scaledVolume to 16
end if
set newVolume to round (scaledVolume / 16 * 100)
set volume output volume newVolume
else if voiceResponse is "lower volume" then
set currentVolume to output volume of (get volume settings)
set scaledVolume to round (currentVolume / (100 / 16))
set scaledVolume to scaledVolume - 1
if (scaledVolume
tell application "Mail"
activate
check for new mail
set unreadEmailCount to unread count in inbox
if unreadEmailCount is equal to 0 then
say "You have no unread messages in your Inbox."
else if unreadEmailCount is equal to 1 then
say "You have 1 unread message in your Inbox."
else
say "You have " & unreadEmailCount & ¬
" unread messages in your Inbox."
end if
if unreadEmailCount is greater than 0 then
say "Would you like me to read your unread email to you?"
tell application "SpeechRecognitionServer"
activate
set voiceResponse to listen for {"yes", "no"} ¬
giving up after 1 * minutes
end tell
if voiceResponse is "yes" then
set allMessages to every message in inbox
repeat with aMessage in allMessages
if read status of aMessage is false then
set theSender to sender of aMessage
set {savedDelimiters, AppleScript's text item delimiters} ¬
to {AppleScript's text item delimiters, "
set current_time to (time string of (current date))
set {savedDelimiters, AppleScript's text item delimiters} to ¬
{AppleScript's text item delimiters, ":"}
set hours to first text item of current_time
set minutes to the second text item of current_time
set AMPM to third text item of current_time
set AMPM to text 3 thru 5 of AMPM
set AppleScript's text item delimiters to savedDelimiters
say "The time is " & hours & " " & minutes & AMPM
--else if voiceResponse is "make a call" then
-- tell application "Skype"
-- -- A Skype API Security dialog will pop up first
-- -- time accessing Skype with this script.
-- -- Select "Allow this application to use Skype" for ¬
-- -- uninterrupted Skype API access.
-- activate
-- -- replace echo123 Skype Call Testing Service ID with ¬
-- -- phone number or your contact's Skype ID
-- send command "CALL echo123" script name ¬
-- "Place Skype Call"
-- end tell
-- else if voiceResponse is "hang up" then
-- tell application "Skype"
-- quit
-- end tell
else if voiceResponse is "quit app" then --
set exitApp to "yes"
say "Listening deactivated. Exiting application."
delay 1
do shell script "killall SpeechRecognitionServer"
end if
end repeat
end timeout
Pero este script podría ser demasiado. Así que primero intente una tarea más simple usando SIRI en su iPhone.
Tal vez un poco tarde, pero ahora con iOS12 puedes ejecutar SSH con la aplicación Siri Shortcuts. No se necesita jailbreak.
Ya lo probé y funcionó increíble.
jacksonwelsh